| Model name |
TMA7100 |
TMA7300 |
| Temperature Range |
-170 to 600℃ |
Ambient to 1500℃ |
| Scanning Rate |
0.01 to 100℃/min |
| Sample Tube |
ㆍQuartz ㆍMetal* ㆍAlumina ㆍQuartz* |
| Probe |
ㆍQuartz Expansion Probe
ㆍQuartz Penetration Probe*
ㆍQuartz Cone Probe*
ㆍQuartz Tension Probe*
ㆍQuartz Bending Probe* (to 500℃)
ㆍVolume Expansion Accessory* (Ambient to 200℃)
ㆍMetal Tension Probe* |
ㆍAlumina Expansion Probe
ㆍQuartz Expansion Probe* (to 1000℃)
ㆍQuartz Penetration Probe* (to 1000℃)
ㆍQuartz Cone Probe* (to 1000℃)
ㆍQuartz Tension Probe* (to 600℃)
ㆍQuariz Bending Probe* (to 500℃) |
| Probe Supporting Method |
Cantilever |
| TMA Measurement Range |
±5mm |
| RMS noise / Sensitivity |
0.005μm /0.01μm |
| Load Range / Resolution |
±5.8N /9.8μN |
±1,47N /9.8μN |
| Maximum Sample Dimensions |
Expansion, Penetration: D 10 x L 25mm
Tension: W5 x T1 x L 25mm |
Expansion: D 10 x L 25mm |
| Sample Length Measurement |
Automated Measurement |
| Atmosphere |
ㆍAir, Inert gas flow
ㆍVacuum* (to 13Pa)
ㆍSwelling* (to 80℃)
ㆍHumidity control* (to 90℃, 90%RH) |
ㆍAir, Inert gas flow
ㆍVacuum* (to 13Pa) |
| Stress Control Mode |
ㆍConstant Loading: ±5.8N ㆍConstant Rate Loading: 9.8 x 10-2 to 9.8 x 106mN/min
ㆍSinusoidal Loading: 0.001 to 1Hz ㆍCombination: maximum 40 steps |
| Strain Control Mode |
ㆍConstant Strain: ±5000μm ㆍConstant Rate Strain Control: 0.01 to 106μm/min
ㆍSinusoidal Strain Control: 0.001 to 1Hz ㆍCombination: maximum 40 steps |
| Gas Purge Control* |
ㆍFlow Meter ㆍGas Control Unit ㆍMass Flow Control Unit |
| Cooling Unit |
LN2 Dewar Vessel |
-170 to 600℃ |
N/A |
| Auto Fan Cooling Unit* |
Ambient to 600℃ |
Ambient to 1500℃ |
| Auto LN2 Gas Cooling Unit* |
-150 to 600℃ |
N/A |
| Electrical Cooling Unit* |
-60 to 450℃ |
N/A |
| *Optional |
|
|
